Information: RMS Software V1.3.1 Upload the property file and firmware update

If you use the RMS-Software 1.3.1 and got the error message "Error reading the device properties" while you read the Properties you need to upload the property-file of the device.
Reason:
New RMS-devices aren't implemented in the RMS-software, if you can't read out the properties for example the RMS-LOG-T30-868, it's necessary to upload the device definitions of the device.
1. Tools--> Setup choose the device for example the RMS-LOG-T30-868
2. Options -->...

General
This article gives an introduction into the temperature measurement by NTC Sensors.


Measurement principle
A NTC Sensor is a temperature sensitive resistance with a Negativ Temperature Coefficient (NTC). Therefore, the resistance of the sensor can be measured and converted into the corresponding temperature value. The higher the temperature, the lower the sensors resistance.

...

Hi RMS Community,

Sometimes, a complex system as RMS needs special know-how and solutions. Such know-how is collected and described in the Troubleshooting Guide.
This document can be downloaded or can be seen in the Online Manual.
If you would like to contribute, correct or complete any issue, please contact our support team and let join the community on your experience.

Thank you in advance....

RMS Config V1.1.2

The new version of the RMS Config V1.1.2 is released. The RMS Config is a gratis software to configure RMS devices without a server connection.

Main content of the release is:

• RMS-LOG-L-D: Device added.
• RMS-ADC-L-R: Device added.
• RMS-LOG-T30-L/868/915: Device added.
• RMS-MLOG-BT-915: Device added.
• RMS-LOG-T/T10-868/915: Option to select the NTC properties for the T10-0001 / T10-0002 / T10-0003 / T10-0004 / T10-0005 / T10-0006 added.

Download of...

RMS-DO-L-R / RMS-DI-L-R

...

RMS-MLOG-X

...

RMS-LOG-T30-915

...

RMS-LOG-T30-L

...

RMS-LOG-T30-868

...

RMS-HCD-S and RMS-HCD-IC102

...

Introduction RMS RF System

...