Update Wireless Settings

<< Click to Display Table of Contents >>

Navigation:  Software Overview > RMS Monitoring Software > Working with the RMS Software > Configure RMS > Configure your Device > Configure your Wireless Device >

Update Wireless Settings

Step 1

Push on the button of the wireless device for 8s. The LED on the device will blick red 3 times.

Step 2

Once logged in to your company, click on "Tools" > "Setup":

 

RMS add a device step 1

 

Step 3

Under the device's menu, add your wireless device by selecting "New" > "Wireless device":

 

RMS add a device step 2

 

Step 4

Select the gateway from the menu. Click on "OK":

 

RMS add a wireless device step 1

 

Step 5

The software will search for the new wireless device. Push on the wireless device's button:

 

RMS add a wireless device step 2

 

Step 6

The LED on the wireless device will flash orange. The devices settings that were already configured will appear in the setup. Define the address and the interval [s] accordingly:

 

RMS add a wireless device step 3

 

Step 7

Serial number:

This is the device's serial number.

 

Name:

Give a name to the device.

 

Address:

Configure the address (between 1 and 60).

 

Interval [s]:

Defines the log interval.

 

Group:

Defines which group the device is attributed to.

 

 

IMPORTANT:

The following options are device specific. Please see the specific devices for more information about how to add them to RMS.

 

Step 8

Click on "OK" and the device is updated within RMS.

 

RMS add a wireless device step 4