|
<< Click to Display Table of Contents >> Navigation: Hardware Overview > Sensors and Probes > TCD-S > Maintenance |
This software tool is used for configuration, customer adjustment and measurement.
The following information and function are available:
•Probe information: serial number, probe address, Firmware version and Firmware update.
•Read out measurements.
•Probe settings: Filter (not compatible with RMS) and simulator function.
Regular calibration
TCD sensors have high long term stability and do not require any additional calibration as supplied. The calibration period will depend on the user. Rotronic recommends a calibration every 12 months. Calibration or Customer Adjustment can be carried out using the RMS-CONFIG or RMS-CLD/WEB software.
Check on www.rotronic.com for the latest version of the firmware. In order to update the firmware, the RMS-CONFIG Software and the AC3001 cable are required. Carry out a Firmware Update here.