1

TheThingsNetwork D1 Device.

Mapping:

•BatV: Battery voltage.

•HumSHT: Internal relative humidity.

•TempCDS: External temperature.

•TempCSHT: Internal temperature.

2

OpenWeatherMap Device.

API Url example for Bern: https://api.openweathermap.org/data/2.5/weather?q=Bern

Mapping:

•Temp: Temperature.

•Pressure: Pressure

•Humidity: Relative humidity.

•Tempmin: Minimum temperature.

•Tempmax: Maximum temperature.

•Visibility: Visibility.

•Windspeed: Windspeed.

•Winddeg: Wind direction.

•Clouds: Clouds.

•Sunrise: Sunrise.

•Sunset: Sunset.

3

RMS Device.

API Url example for MPT-11: https://rms.rotronic.com/RMS/API/DataHistory.ashx?id=11

Mapping:

•Value: Measurement value.

4

Memmert AtmoWEB Device.

API URL example for a chamber with the IP 192.168.0.100: http://192.168.0.100/atmoweb

Mapping:

•TempSet: Temperature setpoint.

•Temp1Read: Temperature reading probe 1.

•Temp2Read: Temperature reading probe 2.

•Temp3Read: Temperature reading probe 3.

•Temp4Read: Temperature reading probe 4.

•HumSet: Relative humidity setpoint.

•HumRead: Realitive humidity reading.

•CO2Set: CO2 setpoint.

•CO2Read: CO2 reading.

•O2Set: O2 setpoint.

•O2Read: O2 reading.

•DoorOpen: Door status open/closed.

5

Lighthouse Apex Z3 Device.

API URL example for a device with the IP 192.168.5.39 communicating over the port 4000: ws://192.168.5.39:4000

Auto channel population/mapping:

Once the device is created with API provider “Lighthouse APEX Z3” then the following eight (8) channels are automatically populated for channel mapping and post paring. The RMS-JSON-API application will only send data to the RMS server if the channels have the status “true” in the “validChannels” list configured within the ApexZ device.

Channel ID:

•0.3

•0.5

•1

•3

•5

•10

•15

•20

Channel Name:

•0.3um

•0.5um

•1um

•3um

•5um

•10um

•15um

•20um