<< Click to Display Table of Contents >> Navigation: Hardware Overview > Converter Devices > Integration of third party products into RMS |
Third party products can be integrated into RMS if the communication protocol is available. The digital communication may however be limited.
RMS is designed for IoT devices as well as networks where each device has an integrated memory and power supply to bridge power and/or communication interruptions. This postulates a strict architecture in terms of communication, timing and other various points to ensure an uninterrupted monitoring.
The RMS-CONVERTER enables digital devices to be integrated into RMS, these digital devices may be stand alone, but also part of another network or system with another design. As such limitations exist in terms of device features and functions for communication stability and overall performance.
Important: Timeouts and data gaps can occur due to mismatching systems and limited compatibility!
If the device integrated via the RMS-CONVERTER-100 has no onboard memory, then any AES Key Refresh (every 24 hours) that will happen at the same time as the measurement interval, a data gap will be generated. This data gap cannot be closed and a log interval will be missing in the database. |
Device name |
Order code |
Function |
Parameter measured |
---|---|---|---|
RMS-8ADC-L-R-A |
RMS-8ADC-L-R-A |
Transmitter with 8 analog inputs |
mA |
RMS-8ADC-L-R-V |
RMS-8ADC-L-R-V |
Transmitter with 8 analog inputs |
V |
RMS-4RTD-L-R |
RMS-4RTD-L-R |
Transmitter with 4 RTD inputs |
Pt100, Pt1000, Ni100, Ni1000 |
HL-RC |
HL-RC-B HTL-RC-T |
Data logger with 1 interchangeable probe input or fixed Pt1000 |
Temperature and relative humidity or temperature only |
Lighthouse Apex R5 |
N/A |
Transmitter with integrated particle counting |
Particles |
Particle Measuring Systems Airnet II |
N/A |
Transmitter with integrated particle counting |
Particles |
oLighthouse Apex R5 data logger