Configuration with RMS-CONFIG

<< Click to Display Table of Contents >>

Navigation:  Hardware Overview > Sensors and Probes > HCD-Sx >

Configuration with RMS-CONFIG

Step 1

Connect the probe to a laptop/PC with an AC3001 cable. Click on add Device>Search>Local Devices and select the device settings.

Step 2

MicrosoftTeams-image (4)

 

Calculation: The probe can be setup to calculate dewpoint and frostpoint.

 

Humidity and temperature simulation: The HCD will deliver a fixed simulated value for either humidity and/or temperature. The probe will show up in RMS with a reminder event: simulator connected.