Unpaking

<< Click to Display Table of Contents >>

Navigation:  Humidity & Temperature Devices > Transmitter > TF5A  >

Unpaking

This section covers how to safely unpack your TF5A device, ensuring that all components are intact and ready for setup.

 

 

Step 1
TF5A_Schachtel

Open packaging to get at its contents.

Step 2
Package_Content

Package contents:

 

•TF5A Transmitter

•Test Certificate

•Mounting kit (2 screws and wall fixings)

•Optional: Additional Type Label in case of rescaling

•Additional Serial Type Label (x3)

•QR Code Instructions

Step 3
Electrical Connection

Open the device and connect the power supply as outlined in the Electrical Connections section of the TF5A manual.

 

Note: The M12 cable strain relief ensures an effective seal only when a cable with the appropriate number of conductors is used.

Step 4
TF5A_frontal_cable

Close the device and securely tighten the screws. Align the connector and manually screw in the probe (Compatible Probes - not included), ensuring the nut is fully tightened.