Configuration via web browser

<< Click to Display Table of Contents >>

Navigation:  Hardware Overview > Gateway and Converters > RMS-CONVERTER-100 > Step-by-Step >

Configuration via web browser

To configure the RMS-CONVERTER-100 please type in the host name of the device http://rms-convXXXXXXXX into the address bar of the web browser.

 

If the RMS-CONVERTER-100 is configured with a fixed IP address, the device can be accessed by typing the IP address into the web browser (example: http://192.168.0.1).

 

Converters with Firmware V1.8

 

rms-converter_Login to the RMS converter via web browser

Figure 1: Log in to the RMS-CONVERTER-100 via web browser.

 

There is a default user and password specified for the RMS-Converter:

oDefault user: rotronic

oDefault password: rmsconv

 

Recommendation: change the password for security reasons.

 

Note:

Should the password be forgotten, simply unplug the device and replug it in: the default login is valid for 10 minutes.

 

clip0152

Figure 2: Configuration of the RMS-CONVERTER-100 via web browser

 

Updated 15.05.2024