Status LED

[Theodor K.]

Hi together,

I observed different type of the status LED signalization - fast or slow blinking or different colors at different situation (normal operation, pairing etc.). At the manual of the RMS-MLOG e. g., there are only view information about it. Is there an overview of the status LED information of the relevant devices available?

Thanks in advance.

[James]

	Pairing
	Trigger	Action	LED
LAN	1s press	Confirms pairing	n x orange, the LED flashes orange when the pairing demand is open.
Wireless	1s press	Confirms pairing	1 x orange, the LED blinks orange for each channel searched.
Wireless		Gateway found	n x orange, the LED flashes orange when the pairing demand is open.
Wireless		Confirmed pairing	3 x green.
Wireless		Issue pairing (time out, no data received)	3 x red.
	Remove pairing
	Trigger	Action	LED
LAN & Wireless	8s press	Removes pairing, stops logging, and turns off device. (LAN-Devices reconnect after the next communication to the webservice)	3 x red, the pairing information stored in the logger is deleted.
	Device status update
	Trigger	Action	LED
LAN	1s press	Shows the current status (only in battery mode)	1 x green, the connection to the server is good. 1 x orange, there is no connection to the server. 2 x red, measurement failed.
Wireless	1s press	Shows the current status	1 x green, the ISM connection is good. 1 x orange, the measurement is good, no ISM connection. 2 x red, measurement failed.
	Wireless range
	Trigger	Action	LED
	1s press	Shows the current wireless status	4 x green, RSSI >-30dBm. 3 x green, RSSI >-60dBm. 2 x green, RSSI >-80dBm. 1 x green, RSSI <= -80dBm.