General
The AW probes (HC2x-AW-x) are used for AW-Measurement (see chapter AW Instruments). These AW probes measures water activity for the given climate.
The AW-Therm works very similar to the probes. The only difference regarding the AW process here is, that the target temperature of the micro climate inside of the AW-Therm chamber can be set.
AW Settings
•Mode - please see chapter AW measurement modes
•Aw Stability - please see chapter AW measurement modes
•Aw Temperature Stability - please see chapter AW measurement modes
•Temperature Setpoint - For AW-Therm only. Sets the target temperature of the micro climate inside of the AW-Therm chamber.
•Plus symbol 
- Adds a next Aw process stept with new AW settings. For AW-Therm only.
AW probe |
AW-Therm |
|---|---|
|
Start, Reset, Report, Batch Number, Product Name and Comments
•Batch - The user can enter a description of the test sequence defined before.
•Product - The user can enter a description of the product.
•Comment - The user enter a further comment to the sequence.
•Start button - the test sequence can be started.
•Reset button - a running process can be cancled.
•Report button - a pdf report can be created in the end of the Aw process.
