<< Click to Display Table of Contents >> Navigation: Hardware Overview > Sensors and Probes > TCD-S > Technical Specifications |
The TCD comes only as a standard clip with a cable probe.
The TCD can be connected directly to a PC or network. Suitable accessories can be found in the Accessories.
Technical Data |
||
---|---|---|
TCD-S-001 |
Accuracy |
±0.25°C from -50...85°C ±0.5°C from -100...-50°C >85°C not yet specified |
Temperature Sensor |
4 wire Pt100 Class B (1/3 DIN EN60751) |
|
Long term stability |
±0.5°C/year |
|
T63 |
75s (1m/s air flow) |
|
Probe potting |
Epoxy resin |
|
Probe diameter |
3mm |
|
Probe length |
50mm |
|
Probe material |
Austenitic Stainless steel 1.4571 (316T1) bar |
|
Probe IP rating |
IP68 |
|
Probe temperature range |
-200...260°C |
|
Cable diameter |
2.1mm |
|
Cable length |
2m |
|
Cable material |
Perfluoroalkoxy alkanes (PFA) |
|
Cable temperature range |
-190...260°C |
|
Housing diameter |
15mm |
|
Housing length |
110mm |
|
Housing material |
Polycarbonate |
|
Housing potting |
Yes |
|
Housing IP rating |
IP65 |
|
Housing temperature range |
-40...85°C |
|
Housing relative humidity range |
0...100%rh |
|
Connector |
Standard Rotronic 7-pin connector |
|
Communication |
MODBUS RTU |
|
Output signal |
UART |
|
Power supply |
3.3...5V |
|
Current consumption |
3.8mA |
|
Adjustment option 1 |
2 point user adjustment possible |
|
Adjustment option 2 |
A, B and C coefficients |
Updated: 21.11.2024