<< Click to Display Table of Contents >> Navigation:  Hardware Overview > LOG Dataloggers > RMS-LOG-L-D > Change Log/Release Notes

1.Version Overview

Please find below the meaning of the version.

•1: Major version number.

•X.1: Minor version number.

•X.X.1: Bug fix or specific update version number.

 

2.Rotronic Tracking System

Rotronic use a tracking system to monitor bugs, features, improvements and change requests. This tracking system is the basis for any software, hardware and firmware User Requirement Specification based upon the GAMP©5 validation model. Each point will be recognized with an ID (eg. RMS-XXX). A description and details are attributed to each point within the tracking system. All changes documented within the RMS Release Notes will have an ID number and a description.

 

3.Firmware V1.4

 

Release Details

 

If server time jumps (because of bad server settings or server HW) between 0.2 and 5.0s, the device of the logger synchronized the new time. If the log interval is small enough and the time jump high enough, under certain circumstances it can happen (if the logger has an interval of 10s), that the logger does not measure, store nor send data within one single interval. Data gaps will occure.

In case of Alarm, the backlight switchs red. The bug was now that the red light did not vanish after ending of the alarm. Furthermore, the backlight did not consider the hysteresis. This was also corrected.

 

 

4.Firmware V1.3

 

Release Details

This new firmware has been implemented due to a quartz that was used for the real time clock has been discontinued and has been replaced with another internal quartz. Rotronic took advantage of this firmware update to implement an improved watchdog feature.

 

5.Firmware V1.3

 

Release Details

This was the first release.