|
<< Click to Display Table of Contents >> Navigation: Hardware Overview > Sensors and Probes > HCD-IC > Humidity and Temperature Calibration/Adjustment > Basic Recommendations |
The RMS-HCD devices use a software based temperature and humidity adjustment function that is both precise and simple to use. Depending on the type of device, the temperature and humidity signals can be adjusted directly within RMS or when connected to a PC.
The purpose of this note is to provide some basic recommendations to users that are not already familiar with the calibration and adjustment of humidity temperature measuring devices. This note also provides instructions on the use of the ROTRONIC humidity standards. These standards can be used to calibrate and adjust the humidity signal when no humidity generator is available.
oTemperature calibration in a liquid bath.
oTemperature calibration in air.