<< Click to Display Table of Contents >> Navigation:  Hardware Overview > Sensors and Probes > HCD-IC > Basic initialization

Integration into RMS

The HCD-IC102 probe is to be initialized and integrated only together with a RMS-logger (see RMS-LOG-L or RMS-LOG-868/915).

 

 

Operation with RMS-Config and AC3001

For an adjustment or a calibration, it is possible to run a HCD-Sx using a PC-SW Tool RMS-Config and an AC3001 cable (accessory) outside of RMS.

For that kind of operation, no basic initialization is necessary. Please consider the RMS-Config SW.

 

 

Operation with Modbus and AC3001

Please consider the chapter Modbus.

For that kind of operation, no basic initialization is necessary.