|
<< Click to Display Table of Contents >> Navigation: Humidity & Temperature Devices > Transmitter > HF1 > Troubleshooting |
Error |
Message |
Solution |
|---|---|---|
E01 |
Sensor out of order |
Turn off meter and re-start again |
E02 |
Measured value under range |
Put meter in normal condition |
E03 |
Measured value over range |
Put meter in normal ocnditioj |
E04* |
Temperature error code & Humidity error code |
Put meter in normal condition |
E11 |
RH calibration error |
Repeat the humidity calibration |
E31 |
Temperature sensor or AD damaged |
Send the instrument in for repair |
E32 |
Memory IC damaged |
Send the instrument in for repair |
E33 |
RH sensor or circuit damaged |
Send the instrument in for repair |
*E04: When temperature values are measured above 60°C, the device will show E04 for Temperature and Humidity values.
There the meter shall be put in normal conditions (refer to specification), to retrieve a functional transmitter