|
<< Click to Display Table of Contents >> Navigation: Humidity & Temperature Devices > Generator > HC100A > Safety |
The manufacturer has designed this equipment to be safe when operated using the procedures detailed in this manual. The user must not use this equipment for any other purpose than that stated. Do not apply values greater than the maximum value stated.
This manual contains operating and safety instructions, which must be followed to ensure the safe operation and to maintain the equipment in a safe condition. The safety instructions are either warnings or cautions issued to protect the user and the equipment from injury or damage. Use qualified personnel and good engineering practice for all procedures in this manual.
The instrument is designed to be completely safe when used with options and accessories supplied by the manufacturer for use with the instrument. The input power supply voltage is limited to 24 V DC.
The use of hazardous materials in the construction of this instrument has been minimized. During normal operation it is not possible for the user to come into contact with any hazardous substance which might be employed in the construction of the instrument. Care should, however, be exercised during maintenance and the disposal of certain parts.
The instrument must be maintained either by the manufacturer or an accredited service agent. Refer to www.processsensing.com for details of Rotronic's or PST’s worldwide offices contact information.
The recommended calibration interval for the HC2A control sensor is one year, unless otherwise specified by Rotronic. The instrument should be returned to the manufacturer, Rotronic / PST, or one of their accredited service agents for re-calibration (go to https://www.processsensing.com/en-us/contact/ for contact information).
This product meets the essential protection requirements of the relevant EU (CE) directives.