The HygroFlex 5 Advanced is by default only available as a wall mount.
Customers with a duct application and HC2A-S probe can use the duct kit setup including the extension cable E2-F3A and flange AC5005 to cover it:
To avoid measurements errors, the probe should be inserted into the environment to be measured.
If necessary, use the respective extension cable and mounting flange to install the standard probe:
Mounting flange |
Probe diameter |
Temperature range |
AC5005 |
15 mm |
100 °C |
AC1305 (AC1303-M) |
15 mm |
200 °C |
Customers with a duct application and HC2A-IC/HC2A-IM probe can use the following setup to cover it:
To avoid measurements errors, the probe should be inserted into the environment to be measured.
If necessary, use the respective extension cable and mounting flange to install the standard probe:
Mounting flange |
Probe diameter |
Temperature range |
AC1305 (AC1303-M) |
15 mm |
200 °C |