AwTherm Calibration
A unique feature of the AwTherm is the ability to remove the entire head to calibrate both the Aw and temperature sensors.
Alternatively, AwTherm can be calibrated in installed condition for Aw / RH using Rotronic calibration salts.
AwTherm Cleaning
Prior to cleaning, the unit should be disconnected from the electrical mains supply.
External surfaces
The external surfaces of the AwTherm may be cleaned with a lint-free cloth dampened with a mild soap solution. Care must be taken not to allow fluids into any of the apertures on the unit.
The fan inlet filter can be cleaned using a vacuum cleaner to remove any particulates.
Filter
Chamber
Periodically it is recommended that the internal surfaces of the AwTherm chamber. The bottom
half can be removed and placed in a dishwasher.
Annual Servicing of AwTherm
The unit does not require routine user maintenance beyond that described in this Section.
Under no circumstance should the unit be opened by personnel unauthorized by the
manufacturer. Doing so will void the manufacturer’s warranty, and expose potentially
dangerous electrical hazards.