|
<< Click to Display Table of Contents >> Navigation: Humidity & Temperature Devices > Transmitter > HF7A > Customer adjustment > Default Configuration |
Configuration of the HF7 by the user and access to its functions requires a PC with the ROTRONIC HW5 or HygroSoft installed. Service cable AC3006 or AC3009 is used to connect the HF7 service connector to a USB port of the PC (see Maintenance -> Service Cable).
Configurable Settings |
Factory default |
Unit system (Metric or English) |
As per ordering code |
Analog signal type (4…20 mA) |
As per ordering code |
Psychrometric calculation |
As per ordering code |
Output 1 parameter, scale and unit |
As per ordering code (%RH) |
Output 2 parameter, scale and unit |
Temperature, unit as per ordering code |
Functions |
Factory default |
Humidity / temperature adjustment |
|
Device write protection |
Disabled |
Menu access from keypad |
Enabled |
Limit humidity output to 100 %RH |
Enabled |
Out-of-limit value digital / display alarm |
Disabled |
Simulator mode |
Disabled |
•For a detailed description of all AirChip3000
•The factory default setting for dew / frost point calculation is frost point below freezing