|
<< Click to Display Table of Contents >> Navigation: Humidity & Temperature Devices > Transmitter > HF3 > Customer adjustment > Default Configuration |
Configuration of the HF3 by the user and access to its functions requires a PC with the ROTRONIC HW5 or HygroSoft installed. Service cable AC3006 or AC3009 is used to connect the HF3 service connector to a USB port of the PC (see Maintenance -> Service Cable).
Configurable Settings |
Applicability |
Factory default |
Unit system (Metric or English) |
HF32, HF33 |
As per ordering code |
Analog signal type (4…20 mA or other) |
HF33 |
As per ordering code |
Psychrometric calculation |
HF32, HF33 |
As per ordering code |
Output 1 parameter, scale and unit |
HF32, HF33 |
As per ordering code (%RH or DP) |
Output 2 parameter, scale and unit |
HF32, HF33 |
Temperature, unit as per ordering code |
Display resolution (optional) |
HF32-S, HF33-S |
1 decimal |
Display backlight (optional) |
HF33-S |
Always on |
Displayed parameters |
HF32, HF33 |
As per ordering code |
Trend indicator (display) |
HF32-S, HF33-S |
Enabled |
Device name |
HF32, HF33 |
Instrument model |
Functions |
Applicability |
Factory default |
Humidity / temperature adjustment |
HF32, HF33 |
|
Device write protection |
HF32, HF33 |
Disabled |
Limit humidity output to 100 %RH |
HF32, HF33 |
Enabled |
Out-of-limit value digital / display alarm |
HF32-S, HF33-S |
Disabled |
Simulator mode |
HF32, HF33 |
Disabled |
•For a detailed description of all AirChip3000
•The factory default setting for dew / frost point calculation is frost point below freezing