<< Click to Display Table of Contents >> Navigation: Software Overview > RMS Monitoring Software > Software Release Notes > V2.3.1.22325 |
Improvements
ID |
Description |
RMS-3248 |
Reset a password without an E-Mail server. |
RMS-3075 |
Firmware files not deleted when the software version is updated (cloud only). |
RMS-3063 |
Pentest: Input Validation Missing. |
RMS-3062 |
Pentest: Inconsistent Authorization. |
RMS-3048 |
Option to send E-Mail's over Port 587. |
RMS-2983 |
The MPT/DEV selection dialogue boxes are too small. |
RMS-2639 |
Work needed for every release. |
Bug Fixes
ID |
Description |
RMS-3294 |
Phone notification continues when alarm is inhibited from the table page. |
RMS-3247 |
Redundant server: the service starts in passive mode if the database is not available. When the database is then available the service switches to active mode and an error occurs. |
RMS-3149 |
When a user is deactivated/deleted, the notification settings remain. |
RMS-3148 |
Reports created by a user are deleted when the user who created the report is deleted. |
RMS-3147 |
Automated reports are not being created based upon the exact time frame requested. |
RMS-3122 |
Retroactive alarms are not triggered when values go directly from high to low alarm or vice versa. |
RMS-3092 |
Issues with wireless loggers when added to another cloud account (See RMS-2957). |
RMS-3049 |
Event «Update to V2.2.0» is repeated every 5 seconds. |
RMS-3034 |
The deviation report wrong colors for alarm zone. |
RMS-3019 |
No finished E-mail at the end of an alarm via alarm schema’s. |
RMS-2989 |
When a negative alarm is set and the event is over, the deviation report will remain incorrect (incorrect measured value, setpoint and limit deviations). |
RMS-2988 |
There is an error in the deviation report when the event is not closed. The date is set to 01.01.0001. |
RMS-2957 |
Unlike with the LAN loggers there is no warning when wireless loggers are added to another Cloud Account. |
RMS-2935 |
Relay not closing when the alarm event is closed. |
RMS-2882 |
When removing the ADC input 1, the input 2 shifts to input 1. |
RMS-2523 |
No audit trail when the report template and logo’s are changed. |