ID

Description

RMS-2295

Monthly report with daily min/max and comment fields:

-Report templates: Daily min/max table.

RMS-2491

Phone/SMS notification using various providers.

RMS-2606

Add relative humidity as a calculated parameter.

RMS-2644

Data gap recovery feature:

-Tools: Data analysis: Data gaps.

RMS-2810

Beta version for pilot users: For Rotronic internal use only.

RMS-2811

System diagnosis feature:

-Tools: Diagnose.

RMS-2819

Additional languages: Spanish and Russian.

RMS-2864

Probe inventory number integration:

-System: Probe inventory numbers.

ID

Description

RMS-520

The alarm script functions have been extended:

-Alarm level: message added.

-Create script result measuring point.

-Definition of alarm level (reminder; warning; error; alarm).

RMS-713

Two step acknowledgment:

-User rights: Confirm quality assurance (QA).

-System: Event confirmation:

oSend E-Mail on confirmation.

oSend E-Mail on QA confirmation.

-Events: Filter:

oFinished events.

oPending events.

oCommented.

oNot confirmed.

oConfirmed QA.

oNot confirmed QA.

-Events:

oConfirm (QA)

RMS-1014

Alarming improvement:

-Events: Deviation report.

-See RMS-2729

-See RMS-2576

RMS-1023

Possibility to choose different time zone within one installation:

-User: Define time zone.

-E-Mail reports: Define time zone.

-Report templates: Time zone.

RMS-1152

Improved read out data events:

If a data gap event is generated by the system and a user pushes on the “try again” button, then event is confirmed with the time, date and user and is no longer bold. The system then creates a read-out data event. If the data gap could not be closed, the original data gap is reopened with the system comment as to why the data gap could not be closed.

RMS-2214

Alarm remains active until acknowledged:

-System: Display event count in header:

oPending reminders.

oPending warnings.

oPending alarms.

oPending errors.

oUnconfirmed messages.

oUnconfirmed reminders.

oUnconfirmed warnings.

oUnconfirmed alarms.

oUnconfirmed errors.

RMS-2240

Try again limit, including improvement from RMS-1152.

RMS-2273

Electronic signature:

-User: Signature (review; approval; responsibility; authorship; free text).

-Events: Signature is added to events.

-Report: Signature is added to reports.

RMS-2430

End of cloud license process: For Rotronic internal use only.

RMS-2576

Alarm escalation:

-Alarm threshold 1/2: Escalation: Warning/Alarm:

oDelay: xx (minutes; hours; days) + Action.

oDelay: xx (minutes; hours; days) + Action.

oDelay: xx (minutes; hours; days) + Action.

RMS-2605

Limit violations: Add the time when the alarm limits are crossed, even when a delay is active. 

-Report templates:

oWarnings summary.

oWarning details.

oAlarms summary.

oAlarms details.

-Tools: Data analysis: Limit violations.

RMS-2622

Delay function should only be taken into account for notifications:

-Measuring point: Warning/Alarm:

oNotification delay.

RMS-2637

Unused Events are removed in the event table filter.

RMS-2682

Reports have fixed time scaling.

RMS-2729

Virtual tristate button:

-Measuring point: New tristate button.

-Measuring point: Settings:

oTristate text (+1).

oTristate text (0).

oTristate text (-1).

-Chart: tristate button status.

-Alarm scheme: Condition: Switch input:

oCondition for alarm thresholds 1 (<; >; =) (0; 1; -1).

oCondition for alarm thresholds 2 (<; >; =) (0; 1; -1).

RMS-2786

Save cloud registrations details in RMS-LG software: For Rotronic internal use only.

RMS-2800

Server redundancy - active/active load balancer configuration possible. 

RMS-2803

Update rms-support@rotronic.com with rms@rotronic.ch.

RMS-2814

API - Modular design for future software modules: For Rotronic internal use only.

RMS-2913

All cloud documents will be deleted once the license memory is over.

ID

Description

RMS-784

RMS-D-L shows deleted measuring points.

RMS-963

The RMS validation report is not always created. 

RMS-990

Actions are not tracked in the audit trail once the user is visible on sub-group and not on joint group. 

RMS-984

Delete a device and adding it again, the device is automatically unpaired.

RMS-1046

The RMS-Converter measuring points are not considered for license measuring point limitation.

RMS-1050

Order of allocate gateway messages are wrong in the audit trail.

RMS-1052

Backfill data gap after database issues not working correctly.

RMS-1057

Layout: depending on the format of the screen the boxes move.

RMS-1062

Alarm E-Mails are being send with a delay of up to 15 minutes.

RMS-1114

Problem with the acknowledge alarm link in the E-Mails. 

RMS-1142

Sum of users and user rights are used for license limitation.

RMS-1172

Problem with high-lighting curve in chart view.

RMS-1179

Database error after registration.

RMS-2213

Reminders are still active after a device has been deleted.

RMS-2217

RMS shows a data gap reminder message where data is available. 

RMS-2275

RMS allows more measuring points than licensed.

RMS-2343

Window bug: information outside of the window.

RMS-2352

Measure point type in RMS Software set to "Not used".

RMS-2364

Low battery reminder on RMS-GW-868 devices.

RMS-2369

Notification continues as alarm is already inactive.

RMS-2374

Issues when a device displays NaN: errors in chart and table.

RMS-2394

Wrong measuring point numbers triggered license limit.

RMS-2415

The digital inputs are showing the wrong values (1 and 0 instead of text).

RMS-2431

The measuring value is outside of the box.

RMS-2447

A script cannot be saved.

RMS-2454

Problem by archiving several measuring points at once.

RMS-2503

The group overview is not correctly saved.

RMS-2505

A device name change is not directly shown in the audit trail.

RMS-2514

Data report: inactivated limits are shown.

RMS-2515

The event report cannot show «°». 

RMS-2518

The SMS cannot show «°» correctly. 

RMS-2537

Calculated measuring point from the data of a JSON device.

RMS-2554

Chinese symbols are not shown correctly in reports.

RMS-2559

Measured values are cut off on chart view.

RMS-2571

The RMS-MDI is not showing the detailed measuring point comment but 0 or 1.

RMS-2575

A probe replaced reminder serial number goes to 0. 

RMS-2600

The SMS alert does not reflect the device or measuring point number.

RMS-2607

Multi Editor: Enable/Disable device/measuring point does not work correctly. 

RMS-2624

The sensor error does not retrigger after manual closure of the event.

RMS-2685

Report - Alarm Limit shown incorrectly outside of work hours. 

RMS-2692

When a device is offline, the delay is not counted. 

RMS-2713

Multi editor won’t allow for >1 MPT to be deleted.

RMS-2715

Missing message to save changes of setting in the system.

RMS-2718

When two event tables are on two dashboards, the event table is empty.

RMS-2720

Automatic logout after 24h does not work correctly.

RMS-2723

Empty event within the audit trail.

RMS-2726

Change of sequence of the test script in the validation setup does not show up in the audit trail.

RMS-2770

Switching buttons does not require to input a reason and a password. 

RMS-2771

Graph bug where the white is replaced with red. 

RMS-2772

Data analysis in one time zone showing values based upon another time zone. 

RMS-2773

Date format is US (month/day/year). 

RMS-2778

Lot of notifications received when a device is disabled.

RMS-2780

Measuring time not valid is moved from a message to a reminder. 

RMS-2782

In summary statistics, if 2 different parameters are chosen, a unit appears in the summary statistic.

RMS-2798

RMS-8ADC-L-R-V unit issues.

RMS-2799

Read out data from DI measurement points creates data gaps.

RMS-2818

Assign user rights for group rights of a user also allows for subgroups.

RMS-2820

When importing a script with a "," instead of a "." the system blocks and the validation function is no longer available. 

RMS-2831

Data gaps on calculated MPT. 

RMS-2840

After deleting the background image in the setup, it still appears in the layout but not in the setup.

RMS-2851

Telephone call duration of event = -1606740235s.

RMS-2852

Error when using a comma in a report title. 

RMS-2854

Alarm event staying open longer than the actual alarm. 

RMS-2855

Alarm inhibit not working correctly. 

RMS-2856

SMS error not shown. 

RMS-2857

SMS not being sent once an inhibited alarm is active again. 

RMS-2859

An existing device is manually readded to the RMS software no data gap, read out data or data are available. 

RMS-2860

Pending errors is showing -1. 

RMS-2908

Multiple device enable/disable is not shown correctly in the audit trail.

ID

Description

RMS-2914

Daily report min/max issues during summer/wintertime change.

RMS-2875

Device ID numbering convention is not correct.

RMS-2880

When an analogue MPT is setup with a “°” or ”%” unit, then the CSV report is false.

RMS-2599

RMS-DI-L-R generates data gaps when switched.

RMS-2882

RMS-ADC-L-R: when input 1 is removed, input 2 moves to input 1.

RMS-2886

RMS-MLOG-B: within the device inventory the RMS-LOG-868 shows up.

RMS-2900

RMS-DO-L-R generates probe replaced when switched.