<< Click to Display Table of Contents >> Navigation: Software Overview > RMS Monitoring Software > Software Release Notes > V2.1.0.20171 |
ID |
Description |
RMS-2693 |
Only database offline will appear in the audit trail and not all DEV offline. |
RMS-2642 |
Download RMS-ADC device audit trail. |
Improvements
ID |
Description |
RMS-2640 |
New device: RMS-LOG-D-L. |
RMS-2569 |
Warning when using the replace function. |
RMS-2551 |
Warning when disabling a device. |
RMS-2384 |
Unnecessary software exception events removed from the audit trail. |
Bug Fixes
ID |
Description |
RMS-2765 |
Alarms closing when retroactive alarm appears even when alarm is still active |
RMS-2739 |
Alarm scripts - notification wasn't sent. |
RMS-2710 |
Audit trail reports Weekly instead of Daily or Monthly instead of Weekly. |
RMS-2702 |
Group tree out of window. |
RMS-2701 |
Web-Service website setup with https generates a bad link in the E-Mails. |
RMS-2688 |
Calculated MPT data gap bug. |
RMS-2623 |
Display digits count wrong, n-1 digits. |
RMS-2614 |
Software Exception: DbEntityValidationException. |
RMS-2613 |
When no user for notification is selected, the event will be triggered for each repeat interval. |
RMS-2611 |
Data gap retry not working when multiple gaps of the same MPT are selected. |
RMS-2568 |
Data analysis shows not the correct time range. It's always 1-minute missing. if the measurement interval is 1min, same for 10s, there is 10s missing in the report. See RMS-2511 for more details. |
RMS-2557 |
Server time change visible in the cloud audit trail. |
RMS-2555 |
Event report - Start and end time depend on last event and not on the start and end time. |
RMS-2552 |
Delete virtual MPT. |
RMS-2516 |
The table report ends when data is no longer available and not when the start/end time is set. |
RMS-2513 |
Within the event report, long texts are not wrapped. |
RMS-2512 |
Within the reports special characters are not shown correctly. |
RMS-2511 |
Within the reports the two last rows are empty. From is included, till is not included in the time scale. |
RMS-2504 |
New wireless device: the address is not be suggested automatically by the system. |
RMS-2494 |
The filter function of the alarm table doesn't deliver the right information. |
RMS-2481 |
Data gap in data analysis display although all data is available on the report. |
RMS-2473 |
Time stamp inconsistence in pdf reports. |
RMS-2470 |
Alarm duration counting inconsistencies. |
RMS-2465 |
Inhibit time is shown with wrong format in email. |
RMS-2452 |
RMS-LOG-T30-L/868/915 not recognised. |
RMS-2450 |
MPT information not appearing. |
RMS-2448 |
Diagrams are no longer displayed within the chart view. |
RMS-2422 |
Event reports incomplete. |
RMS-2413 |
Font is not correctly shown in pdf report. |
RMS-2406 |
1 PT100 with the RMS-LOG-T30. |
RMS-2386 |
MPT Groups and User rights not working correctly. |
RMS-2375 |
Instead of a long data gap, many short data gaps (calculated measurement points). |
RMS-2342 |
Dashboard issue: name of the devices changed. |
RMS-2332 |
Chart confused after backfilling. |
RMS-2326 |
Radio address is used from 2 devices. |
RMS-2321 |
Validation Script error when sending E-Mails. |
RMS-2315 |
MLOG-T10 without Sensor wrong date in data analysis |
RMS-2282 |
Number format of measured values inconstantly shown |
RMS-2279 |
The charts in warning/alarms events within the audit trail are empty. |
RMS-2278 |
Issues when displaying alarm limits. |
RMS-2224 |
Database error due to lack of access right. |
RMS-1186 |
Zoom not working correctly in chart view. |
RMS-1170 |
Measurement Point Serial Numbers not updated in table view. |
RMS-1163 |
Problems with encoding for special character "°". |
RMS-1162 |
Alarm limits wrongly displayed in PDF report. |
RMS-1161 |
Wrong device ID in PDF report. |
RMS-1141 |
Gateway pairing stability. |
RMS-1118 |
LastAdjustRefs shows "adjustment deleted" instead of "---". |
RMS-1116 |
Special character in user defined view wrongly displayed. |
RMS-1098 |
Download report not working with Firefox. |
RMS-1069 |
RMS alarms reports and alarm duration problems. |
RMS-1056 |
Reason of the change not listed in audit trail. |
RMS-1049 |
Emails cannot be sent, Test Email working. |
RMS-940 |
"Read out data" remains open on devices without measurement points. |
RMS-929 |
"created on" too early in data report. |
RMS-866 |
Months are wrong in data analysis when selecting date range (always in German). |
RMS-839 |
If a report generated, there can be some validation errors, without adaption in the database or deleting in database. |
RMS-762 |
PDF Report, Alarm Duration = 0 Measure Values. |
RMS-694 |
Different date formats in the email notification. |
Know Errors
ID |
Description |
RMS-2775 |
Event time stamps based upon the server time and not the users time. |
RMS-2773 |
The date format is US /MM/DD/YY) |
RMS-2771 |
Red is shown within the alarm bands instead of white. |