Add an RMS-D-L to RMS

<< Click to Display Table of Contents >>

Navigation:  Hardware Overview > Display Devices > RMS-D-L > Step-by-Step >

Add an RMS-D-L to RMS

Device Configuration

oConnect the device to the network

oConfigure the network settings using the RMS-Config SW (Download)

Step 1

Open the RMS-Config SW

Step 2

Click on "Device" > "Search" > "Network devices"

 

RMS-LOG-T30-L_RMS_Config$

Note:

Please be sure that you always use the newest RMS-Config version. The newest devices do not work with the old RMS-Config version.

 

Step 3

Choose the device

 

RMS-D-L_RMS_Config_device_list

 

Step 4

Click "Add" > "Settings" and configure the network settings. At the end, click "Write" to save the settings.

 

RMS-D-L_RMS_Config_settings

 

 

 

Pairing / Integration into RMS

Step 1

Open a web browser on your computer, log in to the RMS software and select "Tools" > "Setup" > "Device" > "New" > "LAN device"

 

LAN_add_new_device

 

Step 2

Enter the serial number and click "OK"

 

LAN_add_new_device_enterSN

 

Step 3

Press the device's button

 

IMPORTANT:

Press the button after the LED starts flashing orange.

 

LAN_add_new_device_press_button

 

Step 4

The LED flashes green when connection is successful.

 

 

oConfigure the device by clicking on "Tools" > "Setup" > "Devices" > "Properties" > "Show"

RMS-D-L_Settings

 

oFinish the configuration.