<< Click to Display Table of Contents >> Navigation: Hardware Overview > WiFi Dataloggers > RMS-LOG-W-D > Mechanical Installation |
The device can be securely mounted on a wall using the designated wall holder. The following instructions provide a detailed, step-by-step guide for both installation methods.
Wall Holder
Mount the wall holder onto the wall using commercially available M4 or M5 screws (not included). |
![]() |
Slide the device into the wall holder until it is firmly in place.
Note: Depending on the installation, you can use also other mounting materials as dowels or Velcro® tape. |
|
Note: If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. For mounting the logger on a wall, the wall holder must be used. |
Updated: 27.05.2025