Mechanical Installation

<< Click to Display Table of Contents >>

Navigation:  Hardware Overview > WiFi Dataloggers > RMS-LOG-W-T10-D >

Mechanical Installation

The device can be securely mounted on a wall using the designated wall holder. The following instructions provide a detailed, step-by-step guide for both installation methods.

 

 

Wall Holder

Mount the wall holder onto the wall using commercially available M4 or M5 screws (not included).

RMS_WiFi-Data-Logger_holder

Slide the device into the wall holder until it is firmly in place.

 

Note: Depending on the installation, you can use also other mounting materials as dowels or Velcro® tape.

 

RMS-LOG-WIFI-D_Wallholder2

 

 

 

Note:

If the equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired. For mounting the logger on a wall, the wall holder must be used.  

 

 

 

Updated: 27.05.2025