|
<< Click to Display Table of Contents >> Navigation: Help > Device Topics > LED Overview |
The LED overview for the wireless devices:
RMS-LOG-868/915 |
RMS-LOG-T30-868/915 |
RMS-MLOG-868/915 |
RMS-MLOG-B /BT-868/915 |
|
|---|---|---|---|---|
Status: unpaired and powered (24V or battery). |
||||
Startup (powered). |
10*Green. |
1*Green + 1*Red. |
||
Start pairing, short button press (1s) |
868: 1-6*Orange until the gateway accepts the pairing. 915: 1-11*Orange until the gateway accepts the pairing. |
|||
Pairing successful. |
3*Green. |
|||
Pairing unsuccessful. |
3*Red. |
|||
Status: paired and powered (24V or battery). |
||||
Startup (powered). |
10*Green. |
2*Green. |
||
Status information (every x interval). |
1*Red: Low battery. 1*Orange: No communication to the RMS-GW. 1*Green: No issues. |
1*Red: Low battery. 1*Orange: No communication to the RMS-GW. 1*Green: No issues. 2*Red: Alarm. |
||
Short button press (1s): status information. |
1*Red: Low battery. 1*Orange: No communication to the RMS-GW. 4*Green: RSSI>-30dBm. 3*Green: RSSI>-60dBm. 2*Green: RSSI>-80dBm. 1*Green: RSSI<-80dBm. |
1*Red: Low battery. 1*Orange: No communication to the RMS-GW. 4*Green: RSSI>-30dBm. 3*Green: RSSI>-60dBm. 2*Green: RSSI>-80dBm. 1*Green: RSSI<-80dBm. 2*Red: Alarm. |
||
Long button press (>5s): unpairing. |
3*Red: the device is unpaired. |
|||
If the pairing of a wireless device is unsuccessful, the the logger will blink orange as described in the start pairing process and then blink red as described in the pairing unsuccessful process: n*Orange + 3*Red.
The LED overview for the LAN devices:
RMS-GW-868/915 |
RMS-LOG-L |
RMS-LOG-T30-L |
RMS-D-L |
RMS-DI-L-R |
RMS-DO-L-R |
||
|---|---|---|---|---|---|---|---|
Status: powered (24V without LAN cable). |
10*Green. |
||||||
Status: unpaired powered (24V with LAN cable). |
|||||||
Start pairing, once the serial number has been entered into RMS. |
∞*Orange until the user pushes on the button (1s). |
||||||
Status: paired and powered (24V without LAN cable). |
|||||||
Short button press (1s): status information. |
N/A. |
1*Orange: No communication to the server. |
|||||
Long button press (>5s): unpairing. |
3*Red: Measuring and data logging is stopped for 1 measurement interval before starting again. |
||||||
Status: paired and powered (24V with LAN cable). |
|||||||
Short button press (1s): status information. |
N/A
|
1*Green: No issues. 1*Orange: No communication to the server. 1*Red: Low battery. |
1*Green: No issues. 1*Orange: No communication to the server.
|
||||
Long button press (>5s): unpairing. |
3*Red: Measuring and data logging is stopped for 1 measurement interval before starting again. |
||||||
Status: paired. |
|||||||
Status information (every 5s). |
1*Green: No issues. 2*Red: No server connection. |
1*Green: No issues. 1*Orange: No server connection. |
1*Green when the DI switches. |
1*Green when the DO switches. |
|||
RMS-GW-868/915 in pairing mode. |
∞*Green (every 1s) until the user pushes on the button of the device to be paired or the pairing is interrupted. |
N/A |
|||||