<< Click to Display Table of Contents >>

Navigation:  Hardware Overview > MLOG Dataloggers > RMS-MLOG-T10-868/915 >


The following instructions describe installation of the data logger step by step.


Step 1

Insert the battery.

Make sure it is inserted correctly. The poles are marked on the battery and on the electronics.


RMS-Minilogger_installation 1

Step 2

Put on the housing cover.

RMS-Minilogger_installation 2

Step 3

The wall bracket is fastened to the wall with screws. The screws may only protrude so far that the device can click into place properly when put on to the fastened cover.


RMS-Minilogger_installation 3

Step 4

The housing is put in the wall bracket and clicked into place.

RMS-Minilogger_installation 4

Step 5


The device can then be integrated into the server software.