<< Click to Display Table of Contents >> Navigation: Help > Troubleshooting > Using RMS > HL-NT communication by the converter |
The converter programs the HL-NT device as follows:
oProperties
LogfileMode |
LOG |
Delete old data |
No |
Relais Settings |
All Off |
Write-Protection |
Off |
Current time |
UTC time |
Alarm Settings |
Will not be overwritten, but ignored by the converter and RMS |
oLog Settings (Same for all Probes)
Interval |
1 Min |
Create new file |
Every Day |
Humidity |
On |
Temperature |
On |
Calculation |
Off |
Start time |
1.1.2000 |
Stop time |
1.1.2050 |
Files on the Flash card
oAll XLS files will be deleted
oAll LOG files older than 7 days will be deleted
What to do after a communication interruption:
oInterruption between Converter and HL-NT
▪After the interruption, the RMS requests the missing data from the converter
▪The converter reads the data from the flash card of the HL-NT
oInterruption between RMS and Converter
▪The converter has an internal database and stores the data for the last 7 days.
▪After the interruption, the RMS requests the missing data from the converter