|
<< Click to Display Table of Contents >> Navigation: Hardware Overview > Converter Devices > RMS-4RTD-L-R > Customer adjustment > FUNCTION "P" BUTTON |
In case it is necessary to restore the default parameters of the device (with device powered rather than in INIT condition), push the "P" button located on the front of the device for at least 5 seconds.
The green "PWR" LED will switch-off, the yellow STS LED will become orange and the reset of the device will occur.
When the reset procedure is finish, both the LEDs will set back to the default condition. The device will be reset to the following parameters:
Ethernet |
oIP Address: 192.168.1.100 oSubnet Mask: 255.255.255.0 oGateway Mask: 192.168.1.1 |
Username |
Fact_user |
Password |
Fact_pwd |
Modbus address |
1 |