➢Digital outputs

The device updates the states at the output in the fixed interval.

The relays can be read or set via Modbus TCP.

➢Discovery

With Discovery it is possible to find devices in the subnet with the RMS-Configuration software irrespective of their IP configuration and to change their settings.

➢IP configuration

The devices can have static or dynamic IP configurations. It is recommended that you use a dynamic IP configuration whenever possible. If fixed IPs are used, the network topology must be considered exactly.

➢RMS Web Server settings

Every device has the server address and software path of the RMS server software stored in it in order to build up communication with the RMS server software.

The two parameters can be set with the RMS-Configuration software:

oHost: Address of the server with the RMS software

oServer path: Server path where the server software is installed.

➢Audit Trail

The device stores events when changes are made to the configuration.

➢Firmware update

The firmware of the device can be updated directly via the RMS server software.