|
<< Click to Display Table of Contents >> Navigation: Hardware Overview > WiFi Dataloggers > RMS-LOG-W-T10-D > Change Log/Release Notes |
Version Overview
Please find below the meaning of the version.
•1: Major version number.
•X.1: Minor version number.
Rotronic Tracking System
Rotronic use a tracking system to monitor bugs, features, improvements and change requests. This tracking system is the basis for any software, hardware and firmware User Requirement Specification based upon the GAMP©5 validation model. Each point will be recognized with an ID (eg. RMS-XXX). A description and details are attributed to each point within the tracking system. All changes documented within the RMS Release Notes will have an ID number and a description.
Firmware V1.4
Release date: 14.04.2026
ID |
Description |
|---|---|
RMS-9626A |
Wifi does not reconnect again after an 1h interruption of the router |
RMS-10082A |
Freezing of RF modul |
RMS-11455A |
WPA3 and WPA2 (Prio WPA3) - Wifi Logger as Client |
RMS-11471A |
WPA3 and WPA2 (Prio WPA3) - Wifi Logger as AP |
RMS-11480A |
WPS Pairing with WPA2 only and not with WPA3 available |
RMS-11482A |
Beacon, Hartbeat, Keyexchange etc. - optimized setting |
RMS-11484A |
Improve the Scan-SSID function of the DA16200 |
RMS-11486A |
Device reset cause data gaps |
RMS-11488A |
Double check of time stamp after measurement and storing measurement data into the Flash |
RMS-11490A |
Architecture improvement |
RMS-12029A |
Battery: Fixed the lithium battery percentage indicator |
RMS-12150A |
Buttons: Fixed the AP mode button function and DNS refresh |
RMS-12156A |
DHCP: Removed a duplicate "-" in the DHCP hostname |
Firmware V1.0
Initial release
Release date: 30.05.2022
Updated: 15.04.2026