It is basically very easy to integrate a webcam. Simply enter the link under which the current picture of the camera can be called up. The URL shall refer to a JPG file (Video is not supported)
Important: This link is individual for each type of webcam. The link can be found in the manual of the according webcam. |
For example: http://www2.rotronic.ch/webcam/cam1/current.jpg
Figure 1: Example of webcam integration
If the Webcam is not directly accessible (local network protected by a firewall), the camera must be integrated via an RMS-Converter. In this case, specify the RMS-Converter that is located in the same network as the camera.