The "---" at second 16 is inserted by the system when a data gap is detected.
This ensures that the gap is visible in the chart and that the line is not connected to the next value.
Please note:
It remains even if the data gap is later closed.
|
<< Click to Display Table of Contents >> Navigation: Help > Troubleshooting > Using RMS > "---" in Data Analysis |
The "---" at second 16 is inserted by the system when a data gap is detected.
This ensures that the gap is visible in the chart and that the line is not connected to the next value.
Please note:
It remains even if the data gap is later closed.