Case 319
Question:
The allocate gateway event in the audit trail is not showing the dBm levels.
Possible Root Cause:
Up to V1.3.3: If the data logger has better reception from one gateway compared to another, it will switch straight away.
As of the V2.0.0: The average of the last 5 RSSI values is taken. If one value is missing, the average RSSI value will be reduced by 10. The gateway will be switched if the difference is >=15dB (or 10dBm if the RSSI <-90dBm).
The allocate gateway event in the audit trail is not showing the dBm levels.
Possible Root Cause:
- No data was sent to this gateway and as of such, the allocate gateway event will reoccur, back to the original gateway.
- Upgrade to the software >V2.0.0 for an improved gateway allocation function.
Up to V1.3.3: If the data logger has better reception from one gateway compared to another, it will switch straight away.
As of the V2.0.0: The average of the last 5 RSSI values is taken. If one value is missing, the average RSSI value will be reduced by 10. The gateway will be switched if the difference is >=15dB (or 10dBm if the RSSI <-90dBm).
No matching posts in this thread.