Status LED

Hi together,

I observed different type of the status LED signalization - fast or slow blinking or different colors at different situation (normal operation, pairing etc.). At the manual of the RMS-MLOG e. g., there are only view information about it. Is there an overview of the status LED information of the relevant devices available?

Thanks in advance.

	Pairing
	Trigger	Action	LED
LAN	1s press	Confirms pairing	n x orange, the LED flashes orange when the pairing demand is open.
Wireless	1s press	Confirms pairing	1 x orange, the LED blinks orange for each channel searched.
Wireless		Gateway found	n x orange, the LED flashes orange when the pairing demand is open.
Wireless		Confirmed pairing	3 x green.
Wireless		Issue pairing (time out, no data received)	3 x red.
	Remove pairing
	Trigger	Action	LED
LAN & Wireless	8s press	Removes pairing, stops logging, and turns off device. (LAN-Devices reconnect after the next communication to the webservice)	3 x red, the pairing information stored in the logger is deleted.
	Device status update
	Trigger	Action	LED
LAN	1s press	Shows the current status (only in battery mode)	1 x green, the connection to the server is good. 1 x orange, there is no connection to the server. 2 x red, measurement failed.
Wireless	1s press	Shows the current status	1 x green, the ISM connection is good. 1 x orange, the measurement is good, no ISM connection. 2 x red, measurement failed.
	Wireless range
	Trigger	Action	LED
	1s press	Shows the current wireless status	4 x green, RSSI >-30dBm. 3 x green, RSSI >-60dBm. 2 x green, RSSI >-80dBm. 1 x green, RSSI <= -80dBm.