Upairing of RF logger

Hi together,
how a RF logger can be upaired safely?

Option1: Press the button app. 5 sec. permanently. The device blinks 3 times shortly. Than the RF logger is unpaired. - or -
Option2: Delete the device from the RMS, than the RMS sends a unpairing order to the RF logger. !Attention! The unpairing order needs still one further interval to be sent end executed by the system/device. If the interval is set e. g. to 15min., the RF logger will be unpaired 15min. later. !

Hi Theodor,

Please beware, if you delete the device from RMS, you will also delete all measurement values and all Events!!!
Please check to see if the RMS admin allows for devices to be deleted before (if it is not permitted, RMS will tell you so).

Regards,
James