Announcement

Collapse
No announcement yet.

Case 322

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Case 322

    Question:
    I have changed the log interval via RMS on a HygroLog NT/HL-NT, integrated using the RMS-CONVERTER-100 but the device is still logging at the initial rate.

    Possible Root Cause:
    1. The RMS-CONVERTER has not sent the command to the device.
    Solution:
    1. Power OFF/ON both the RMS-CONVERTER and the HygroLog NT/HL-NT.
    2. Wait until the RMS-CONVERTER sends the command to the HygroLog NT/HL-NT.
    Additional Information:
    When using the HygroLog NT/HL-NT, the RMS-CONVERTER needs to send the details to the device.
Working...
X